Bachmann Trains & Accessories

Bachmann Trains Ho Scale
How do you install the switch track for a bachmann e-z track HO Scale train track?

I need more details about the wiring.

One wire is a common ground and the other two throw the points one way or the other. Usually the centre wire is the ground.
To check the others before you solder, touch the wire to one button on the electric switch board and then touch the button on, note the direction of the turnout. That button throws the switch that way. If its wrong switch to the other wire, and solder. Solder the last wire to the other button. Test to make sure.
When throwing turnouts, make sure you just touch the button – don’t hold it down. Holding it down may cause you to burn out the relay that moves the throwbar.

Bachmann Trains Ho Scale

When you first become interested in model trains, it is easy to fall into the trap of rushing to lay down track and skipping the full planning process.

As a general rule, it is always best to design your track layout before you start creating the real thing. You will need to plan not only the model train track, but also elevations, buildings, mountains and any other landscape details.

Without a proper plan you won’t have accurate measurements to begin building the bench that your model train layout will sit on.

Think of it as though you were building a house; without the correct foundations, the whole thing will fall down. Work from the bottom up. The most important foundation for your model train plan is the bench.

The room you choose to create your bench in should be completely ready to house your model train layout.

Model trains are no small thing!

Check the lighting and condition of the room, as well as planning, how you will manage the layout once it is set up. Try not to back the bench into a corner, unless it is shallow enough for you to reach the furthest corner.

A large layout may require a hole in the center of your bench. This allows you to reach everything around you as you stand in the hole. Think long term.

The main supporting structure can be on whatever scale you please. A complete novice may wish to opt for a smaller, simpler layout and therefore requires a smaller bench. However, as your interest and expertise in model trains grows, so will your layout ambitions.

A sheet of plywood on the top of a table or work bench is a great way to start your model train hobby.

Alternatively, a solid built bench makes the perfect foundation for a complex track plan.

There are two options available to you if you wish to build the bench; build it from scratch or buy a pre-cut and drilled kit to put together simply and quickly.

Starting from scratch, you will need to make a base, which will support the platform for your layout.

It is fairly simple to do, if you have the right tools and a substantial amount of patience. By creating two, strong L-shaped beams, using the L-girder method, a frame can be put together quite quickly.

Once you have the two beams, attach them parallel to one another, using two more lengths of plywood. This rectangular frame can then be set on supporting legs. Ensure the entire supporting structure is firmly attached and you are ready to move on.

Not everyone is good at woodworking. So, you may wish to buy a kit and simply set it up in your own home. This allows you to choose a pre-cut and drilled, technically accurate bench that saves time. Depending on your skills and tools, it is certainly an easier option to buy a kit.

The basic bench can then have a platform added to it. Use a thick sheet of plywood for a platform to lay your track on. Whether you choose to lay your track and build the landscape around the layout, or vice versa, is entirely up to you.

Some of the experienced model railroaders will tell you that you should create your landscape and elevations before laying your track. I prefer laying the track first and then adding the landscape. It is a personal preference.

Whether you are a complete beginner or a model train expert, every model train layout should have a sturdy, well-built bench.

Take the time to plan before you start building; it will save valuable time when you get to the exciting part of laying of the track.

Dan B Morgan is the author of Model Trains For Beginners – compulsory reading for any model train beginner. This website contains valuable information on how to save the most time and money building your dream model train layout.

For a FREE report on the “7 Model Train Mistakes You Need To Avoid” go to => http://modeltrainsforbeginners.com/

Can you mix a match different brands of HO scale trains and tracks.?

I want to purchase Marklin train with Bachmann tracks (Bachmans tracks are cheap).

Yes all HO scale railroad equipment, engines, cars, track are ok to mix. There might be some differences in the track connectors. This a guess on that. One thing, not all brands of track are created equal. Sometimes inexpensive track can cost you more in the long haul. Like many things in life, you get the quality you pay for!

Wingman

Bachmann Emily HO scale and a small story…